A Warm and Airtight Welcome for Trekkers to Norways Glacial North
The breathtaking beauty of Norways far north now has a first-rate new facility to welcome adventurers. Commissioned by the Norwegian Trekking Association (DNT) and designed by Jarmund/Vigsnæs Architects (
www.jva.no
), the remote Rabothytta cabin has been built to precise specifications to withstand the harsh extremes of weather in the region. Two different types of DuPont Tyvek® advanced breather membranes have been used in the construction to ensure a wind-tight envelope that is protected against moisture while allowing vapour to diffuse.
The cabin consists of a timber frame and asphalt board structure with concrete foundations and a façade of 32mm local spruce blanks in a natural finish. Spruce also clads the interior walls and forms the cabin floor, while DuPont Tyvek® Soft seals the interstitial envelope, protecting the hut both during and after the construction process. The pitched roof structure is wrapped in DuPont Tyvek® Supro Grid as an airtight wind and moisture barrier a crucial element to guard the build until completion and to enhance interior comfort once occupied. Further protection is provided by Isola Isokraft, an extremely tough asphalt membrane covered with timber planks.
Svein Arne Brygfeld of the Norwegian Trekking Association (
www.turistforeningen.no
) says, The structure was conceived both to withstand the elements and to dynamically interact with its environment. It is designed to resemble a large and ancient rock within the landscape, at ease with and yet involved with its surroundings. Wind will work heavily on the structure and during the winter much snow will move around the cabin. We wanted to create an exterior form that could resist a heavy build-up of snow and at the same time, we wanted visitors to fully experience the magical scenery from the comfort of the interior.
Svein explains that, based on a limited footprint, the functional design of the cabin is necessarily compact, but with very thick insulation on all sides. The structures ability to cope with wind pressure is critical due to its proximity to a large glacier on one side and steep mountains on the other, with wind speeds of more than 200 km per hour not unusual. The membranes, Svein says, play a vital role in managing these conditions, so DuPont Tyvek® was fundamental to the design. Furthermore, when the hut is not in use the interior temperature may be lower than the exterior, thus moisture protection is even more important than in a climate regulated building.
For more information about
DuPont Tyvek®
in the UK please visit
www.tyvek.co.uk
or visit their
Stand B33
at
Timber Expo
.